|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
version 1.1 06.01.02 _____________________________________________________________________________________________________ TFS360C.doc VI TELEFILTER SAW Filter Specification TFS 360C 1/4 _____________________________________________________________________________________________________ Measurement condition Ambient temperature: 23 C Input power level: 0 dBm Terminating impedances at fc: Input: 440 || -1.15pF Output: 440 || -1.15pF External coupling coil: 98 nH Construction and pin configuration see page 2 Characteristics Remark: Reference level for the relative attenuation arel of the TFS 360 C is the minimum of the pass band attenuation amin. The minimum of the pass band attenuation amin is defined as the insertion loss ae. The centre frequency fc is the arithmetic mean value of the upper and lower frequencies at the 1.5 dB filter attenuation level relative to the insertion loss ae. The nominal frequency fN is fixed on 360 MHz without tolerance. Data _____________________________________________________________________________________________________ Insertion loss ae = amin max 5,0 dB (Reference level) _____________________________________________________________________________________________________ Nominal frequency fN 360,0 MHz ___________________________________________________________________________________________________ Centre frequency 360,0 MHz fc _____________________________________________________________________________________________________ Pass band ripple fN 67,7kHz BW max 1,5 dB _____________________________________________________________________________________________________ Relative attenuation arel typ. value tolerance/limit fN 0,4 MHz...fN 0,6 MHz min 27 dB MHz min 42 dB fN 0,6 MHz...fN 0,8 MHz min 50 dB fN 0,8 MHz...fN 1,6 MHz min 45 dB fN 1,6 MHz...fN 3,0 min 52 dB fN 3,0 MHz...fN 115 MHz _____________________________________________________________________________________________________ Group delay ripple GD fN 67,76 kHz max 2,0 s _____________________________________________________________________________________________________ Input power level max 10 dBm _____________________________________________________________________________________________________ Operating temperature range Storage temperature - 20 C ... + 75 C -35 C ... + 85 C ppm/K __________________________________________________________________________________________ Temperature coefficient of frequency __________________________________________________________________________________________ Frequency inversion temperature + 20 C _____________________________________________________________________________________________________ *) fc(Hz) = Tcf(ppm/K) x (T - TA) x fCAT (MHz) ( Tcf ) *) - 0.036 Generated: Checked / approved: ______________________________________________________________________________________________________ _ VI TELEFILTER Vectron International Inc. Potsdamer Strae 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. TFS360C.doc version 1.1 06.01.02 _____________________________________________________________________________________________________ VI TELEFILTER SAW Filter Specification TFS 360C 2/4 _____________________________________________________________________________________________________ Construction and pin configuration (All dimensions in mm) S 360C L48 1 Output 3 Ground 5 Ground 7 Input 9 Ground 11 Ground 2 Output 4 ext. Coil 6 Ground 8 Input 10 Ground 12 Ground 50 Ohm Test circuit 1 LB-IN L1 8 1 L2 LB-OUT C1 SAW 7 4 3,5,6,9,10,11,12 L5 2 C2 L3 L4 50 Ohm Test circuit 2 LB-IN C1 8 1 C2 LB-OUT L1 SAW 7 2 4 L3 L2 C3 C4 3,5,6,9,10,11,12 ______________________________________________________________________________________________________ _ VI TELEFILTER Vectron International Inc. Potsdamer Strae 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. TFS360C.doc version 1.1 06.01.02 _____________________________________________________________________________________________________ VI TELEFILTER SAW Filter Specification TFS 360C 3/4 _____________________________________________________________________________________________________ Stability characteristics After the following tests the filter shall meet the whole specification: 1. Shock: 2. Vibration: 3. Damp heat: (cycle) 4. Resistance to solder heat (reflow): 500g, 18 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 25 C to 55C / 95% r.H. / 10 cycles DIN IEC 68 - 2 - 30 Db max. 2 times reflow process; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; Packing Tape & Reel: IEC 286 - 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: Real of empty components at start: Real of empty components at start including leader: Trailer Tape (all dimensions in mm) W Po Do D1 : : : : 16 4,0 1,5 1,5 0,3 0,1 + 0,1 + 0,5 E Ao F W 3000 min 300 mm min 500 mm min 300 mm EMBOSSED CARRIER TAPE Do Po P2 E : F : G (min) : P2 P1 : : 1,75 0,1 7,5 0,1 0,60 2,0 8,0 1,5 5,5 7,5 0,1 0,1 D1 13,4 0,1 Bo G D1(min) : Ao : Bo : P1 0,1 0,1 COVER TAPE W2 Reel (all dimensions in mm): A W1 W2 (max) : N (min) C : : : : 330 16,4 +2 22,4 >= 50 C A N 13,0 +0,5/-0.20 W1 The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape. The marking of the filters is able to read if the view is directed on the upper side of the carrier tape with the sprocket holes on the right side of the tape. ______________________________________________________________________________________________________ _ VI TELEFILTER Vectron International Inc. Potsdamer Strae 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. TFS360C.doc version 1.1 06.01.02 _____________________________________________________________________________________________________ VI TELEFILTER SAW Filter Specification TFS 360C 4/4 _____________________________________________________________________________________________________ Air reflow temperature conditions 1st and 2nd air reflow profile Name: Temperature: Time: pre-heating periods 150 C - 170 C 60 sec. - 90 sec. main-heating periods over 200 C 20 sec. - 25 sec. peak temperature 255 C 5 C Chip-mount air reflow profile 260 240 220 200 180 temperature / C 160 140 120 100 80 60 40 20 0 0 20 40 60 80 100 120 time / sec. 140 160 180 200 220 240 Table for temperature vs. time during the air reflow process Tolerance of temperatures: 5 C time / sec. 0 10 20 30 40 50 60 70 80 90 100 110 120 130 temperature / C 23 34 46 60 80 103 121 134 143 150 154 156 158 159 time / sec. 140 150 160 170 180 190 195 200 205 210 215 220 230 240 temperature / C 160 161 164 170 180 205 230 255 230 205 180 165 140 120 ______________________________________________________________________________________________________ _ VI TELEFILTER Vectron International Inc. Potsdamer Strae 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. |
Price & Availability of TFS360C |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |